中南大学学报·社会科学版杂志 CSSCI南大期刊 北大期刊

中南大学学报·社会科学版 2013年第10期杂志 文档列表

Crystallography of Zr poisoning of Al-Ti-B grain refinement using edge-to-edge matching model2635-2642

摘要：The mechanism of zirconium poisoning on the grain-refining efficiency of an Al-Ti-B based grain refiner was studied. The experiment was conducted by melting Al-5Ti-1B and Al-3Zr master alloys together. The edge-to-edge matching model was used to investigate and compare the orientation relationships between the binary intermetallic compounds present in the Al-Ti-B-Zr system. The results show that the poisoning effect probably results from the combination of Al3 Zr with Al3 Ti and the decreased amount of Ti solute, for Al3 Ti particles have good crystallographic relationships with Al3 Zr. Totally six orientation relationships may present between them, while they play vital roles in grain refinement. TiB2 particles appear to remain unchanged because of a bit large misfit. Only one orientation relationship may present between them to prevent Al3 Zr phase from forming on the surface of TiB2, though TiB2 is agglomerated. The theoretical calculation agrees well with the experimental results. The edge-to-edge matching model is proved to be a useful tool for discovering the orientation relationships between phases.

Microstructure and mechanical properties of high speed indirect-extruded Mg-5Sn-(1,2,4 )Zn alloys2643-2649

摘要：The microstructural evolution and mechanical properties of high speed indirect-extruded Mg-5%Sn-(1, 2, 4) Zn(mass fraction, %) alloys were investigated by optical microscopy(OM), X-ray diffraction(XRD), scanning electron microscopy(SEM), differential thermal analysis(DTA) and a static tension tester. All the studied alloys can be extruded successfully at a high speed of 10 m/min. The grain size, area fraction of particles and tensile properties are found to be greatly affected by the extrusion speed and Zn content, resulting in tensile properties showing lower strength and ductility as the extrusion speed increases and Zn content decreases. The dependence of grain size and tensile properties on the second phase particles is also discussed.

Electromagnetic wave propagation of wireless capsule endoscopy in human body2650-2656

摘要：Wireless capsule endoscopy(WCE) is a promising technique which has overcome some limitations of traditional diagnosing tools, such as the comfortlessness of the cables and the inability of examining small intestine section. However, this technique is still far from mature and asks for the feasible improvements. For example, the relatively low transmission data rate and the absence of the real-time localization information of the capsule are all important issues. The studies of them rely on the understanding of the electromagnetic wave propagation in human body. Investigation of performance of WCE communication system was carried out by studying electromagnetic(EM) wave propagation of the wireless capsule endoscopy transmission channel. Starting with a pair of antennas working in a human body mimic environment, the signal transmissions and attenuations were examined. The relationship between the signal attenuation and the capsule(transmitter) position, and direction was also evaluated. These results provide important information for real-time localization of the capsule. Moreover, the pair of antennas and the human body were treated as a transmission channel, on which the binary amplitude shift keying(BASK) modulation scheme was used. The relationship between the modulation scheme, data rate and bit error rate was also determined in the case of BASK. With the obtained studies, it make possible to provide valuable information for further studies on the selection of the modulation scheme and the real-time localization of the capsules.

Photocatalytic properties of thin films of ruthenium metallopolymers/gold nanoparticle: Polyoxometalate composites using visible excitation2657-2662

摘要：Thin layers of an electrostatically associated adduct RuPVP-AuNP:POM formed between the polyoxomolybdate, [S2 Mo18 O62 ]4, the polycationic metallopolymer [Ru(bpy)2(PVP)10 ](ClO4)2 and DMAP-protected gold nanoparticle have been deposited onto electrodes using two separate methods, alternate immersion layer-by-layer assembly and pre-assembled drop-casting; PVP is poly(4-vinylpyridine), BPY is 2,2’-bipyridyl, and DMAP is 4-dimethylaminopyridine. Significantly, the efficiency of the photocatalysis depends markedly on the structure of the [RuPVP-AuNP:POM] even when photonic properties are very similar. Strikingly, despite their similar photonic properties, an additional optical transition is observed in UV-vis and the Raman spectra of pre-assembled drop cast [RuPVP-AuNP:POM], which was not seen in dip coated [RuPVP-AuNP:POM]. Importantly, this electronic communication enhances the photocatalytic oxidation of benzaldehyde by a factor of more than four. While there is clear evidence for photosensitisation in the drop cast not present for the dip coated systems, the magnitude of the photocurrent, i.e.,(82.2 6.6) nA·cm 2for pre-assembled drop cast [RuPVP-AuNP:POM] at a ruthenium to Au nanoparticle mole ratio of 48:1, is twice as large as that those found in [Ru-PVP:POM] film.

Iterative circle fitting based on circular attracting factor2663-2675

摘要：An intuitive method for circle fitting is proposed. Assuming an approximate circle(CA,n) for the fitting of some scattered points, it can be imagined that every point would apply a force to CA,n, which all together form an overall effect that 'draws' CA,n towards best fitting to the group of points. The basic element of the force is called circular attracting factor(CAF) which is defined as a real scalar in a radial direction of CA,n. An iterative algorithm based on this idea is proposed, and the convergence and accuracy are analyzed. The algorithm converges uniformly which is proved by the analysis of Lyapunov function, and the accuracy of the algorithm is in accord with that of geometric least squares of circle fitting. The algorithm is adopted to circle detection in grayscale images, in which the transferring to binary images is not required, and thus the algorithm is less sensitive to lightening and background noise. The main point for the adaption is the calculation of CAF which is extended in radial directions of CA,n for the whole image. All pixels would apply forces to CA,n, and the overall effect of forces would be equivalent to a force from the centroid of pixels to CA,n. The forces from would-be edge pixels would overweigh that from noisy pixels, so the following approximate circle would be of better fitting. To reduce the amount of calculation, pixels are only used in an annular area including the boundary of CA,n just in between for the calculation of CAF. Examples are given, showing the process of circle fitting of scattered points around a circle from an initial assuming circle, comparing the fitting results for scattered points from some related literature, applying the method proposed for circular edge detection in grayscale images with noise, and/or with only partial arc of a circle, and for circle detection in BGA inspection.

Analysis of stress and natural frequencies of high-speed spatial parallel mechanism2676-2684

摘要：In order to grasp the dynamic behaviors of 4-UPS-UPU high-speed spatial parallel mechanism, the stress of driving limbs and natural frequencies of parallel mechanism were investigated. Based on flexible multi-body dynamics theory, the dynamics model of 4-UPS-UPU high-speed spatial parallel mechanism without considering geometric nonlinearity was derived. The stress of driving limbs and natural frequencies of 4-UPS-UPU parallel mechanism with specific parameters were analyzed. The relationship between the basic parameters of parallel mechanism and its dynamic behaviors, such as stress of driving limbs and natural frequencies of parallel mechanism, were discussed. The numerical simulation results show that the stress and natural frequencies are relatively sensitive to the section parameters of driving limbs, the characteristic parameters of material on driving limbs, and the mass of moving platform. The researches can provide important theoretical base of the analysis of dynamic behaviors and optimal design for high-speed spatial parallel mechanism.

Self-adaptive PID controller of microwave drying rotary device tuning on-line by genetic algorithms2685-2692

摘要：The control design, based on self-adaptive PID with genetic algorithms(GA) tuning on-line was investigated, for the temperature control of industrial microwave drying rotary device with the multi-layer(IMDRDWM) and with multivariable nonlinear interaction of microwave and materials. The conventional PID control strategy incorporated with optimization GA was put forward to maintain the optimum drying temperature in order to keep the moisture content below 1%, whose adaptation ability included the cost function of optimization GA according to the output change. Simulations on five different industrial process models and practical temperature process control system for selenium-enriched slag drying intensively by using IMDRDWM were carried out systematically, indicating the reliability and effectiveness of control design. The parameters of proposed control design are all on-line implemented without iterative predictive calculations, and the closed-loop system stability is guaranteed, which makes the developed scheme simpler in its synthesis and application, providing the practical guidelines for the control implementation and the parameter design.

An optimized framework for degree distribution in LT codes based on power law2693-2699

摘要：LT codes are practical realization of digital fountain codes, which provides the concept of rateless coding. In this scheme, encoded symbols are generated infinitely from k information symbols. Decoder uses only(1+α)k number of encoded symbols to recover the original information. The degree distribution function in the LT codes helps to generate a random graph also referred as tanner graph. The artifact of tanner graph is responsible for computational complexity and overhead in the LT codes. Intuitively, a well designed degree distribution can be used for an efficient implementation of LT codes. The degree distribution function is studied as a function of power law, and LT codes are classified into two different categories: SFLT and RLT codes. Also, two different degree distributions are proposed and analyzed for SFLT codes which guarantee optimal performance in terms of computational complexity and overhead.

Particle filter with importance density function generated by updated system equation2700-2707

摘要：The current measurement was exploited in a more efficient way. Firstly, the system equation was updated by introducing a correction term, which depends on the current measurement and can be obtained by running a suboptimal filter. Then, a new importance density function(IDF) was defined by the updated system equation. Particles drawn from the new IDF are more likely to be in the significant region of state space and the estimation accuracy can be improved. By using different suboptimal filter, different particle filters(PFs) can be developed in this framework. Extensions of this idea were also proposed by iteratively updating the system equation using particle filter itself, resulting in the iterated particle filter. Simulation results demonstrate the effectiveness of the proposed IDF.

Automatic web services classification based on rough set theory2708-2714

摘要：With development of web services technology, the number of existing services in the internet is growing day by day. In order to achieve automatic and accurate services classification which can be beneficial for service related tasks, a rough set theory based method for services classification was proposed. First, the services descriptions were preprocessed and represented as vectors. Elicited by the discernibility matrices based attribute reduction in rough set theory and taking into account the characteristic of decision table of services classification, a method based on continuous discernibility matrices was proposed for dimensionality reduction. And finally, services classification was processed automatically. Through the experiment, the proposed method for services classification achieves approving classification result in all five testing categories. The experiment result shows that the proposed method is accurate and could be used in practical web services classification.

A new method to create depth information based on lighting analysis for 2D/3D conversion2715-2719

摘要：A new method creating depth information for 2D/3D conversion was proposed. The distance between objects is determined by the distances between objects and light source position which is estimated by the analysis of the image. The estimated lighting value is used to normalize the image. A threshold value is determined by some weighted operation between the original image and the normalized image. By applying the threshold value to the original image, background area is removed. Depth information of interested area is calculated from the lighting changes. The final 3D images converted with the proposed method are used to verify its effectiveness.

Local sparse representation for astronomical image denoising2720-2727

摘要：Motivated by local coordinate coding(LCC) theory in nonlinear manifold learning, a new image representation model called local sparse representation(LSR) for astronomical image denoising was proposed. Borrowing ideas from surrogate function and applying the iterative shrinkage-thresholding algorithm(ISTA), an iterative shrinkage operator for LSR was derived. Meanwhile, a fast approximated LSR method by first performing a K-nearest-neighbor search and then solving a l1optimization problem was presented under the guarantee of denoising performance. In addition, the LSR model and adaptive dictionary learning were incorporated into a unified optimization framework, which explicitly established the inner connection of them. Such processing allows us to simultaneously update sparse coding vectors and the dictionary by alternating optimization method. The experimental results show that the proposed method is superior to the traditional denoising method and reaches state-of-the-art performance on astronomical image.

Non-fluctuating target detection in low-grazing angle with MIMO radar2728-2734

摘要：The non-fluctuating target detection in low-grazing angle using multiple-input multiple-output(MIMO) radar systems was studied, where the multipath effects are very abundant. The performance of detection can be improved via utilizing the multipath echoes. First, the reflection coefficient considering the curved earth effect is derived. Then, the general signal model for MIMO radar is introduced for non-fluctuating target in low-grazing angle. Using the generalized likelihood ratio test(GLRT) criterion, the detector of non-fluctuating target with multipath was analyzed. The simulation results demonstrate that the MIMO radar outperforms the conventional radar in non-fluctuating target detection and show that the performance can be enhanced markedly when the multipath effects are considered.

Prediction of gas pulsation of an industrial compressor2735-2740

摘要：The measurement and prediction of gas pulsations are performed along the discharge pipeline of a reciprocating compressor for a refrigerator. A regression based experimental model of the one-dimensional acoustic field is developed. First, the conventional method for gas pulsation measurement and prediction, which separates the incident and reflected wave of acoustic waves traveling in the frequency domain, is discussed. Then, regression based on our proposed simple model, which is able to predict gas pulsation compared to the conventional method, is introduced for the analysis of a reciprocating compressor(The conventional method requires the value of sound speed in the piping line for the reciprocating compressor). A numerical prediction is made for the regression method. Three power spectrum values along the discharge pipeline are used for analysis, and two values are used for verification. Our results are in a good agreement with the conventional method.

Efficient and secure source authentication scheme for multicast user authentication2741-2746

摘要：Multicast technology application has been widely utilized in broadband internet. Source authentication is one of the most needs for many multicast applications transferring real-time information such as stream video and online news. Because multicast current services provided to the group members are changed dynamically, data transferring by a group member is not used by the recipient. In order to verify the identity of the sender who sent the packet and to make sure that the data have not been tampered, an optimized source authentication scheme has been proposed to transfer the authentication information not to the next-door packet. The proposed method for multiple packets authenticates the source with a limited number of electronic signatures. The proposed method can reduce overhead compared to the method by adding a digital signature for every packet. In addition, by sending the generated electronic signature to the first packet and the last packet, it prevents the loss of consecutive packets, as well as a source authentication can be provided in real-time services.

Improved head-driven statistical models for natural language parsing2747-2752

摘要：Head-driven statistical models for natural language parsing are the most representative lexicalized syntactic parsing models, but they only utilize semantic dependency between words, and do not incorporate other semantic information such as semantic collocation and semantic category. Some improvements on this distinctive parser are presented. Firstly, "valency" is an essential semantic feature of words. Once the valency of word is determined, the collocation of the word is clear, and the sentence structure can be directly derived. Thus, a syntactic parsing model combining valence structure with semantic dependency is purposed on the base of head-driven statistical syntactic parsing models. Secondly, semantic role labeling(SRL) is very necessary for deep natural language processing. An integrated parsing approach is proposed to integrate semantic parsing into the syntactic parsing process. Experiments are conducted for the refined statistical parser. The results show that 87.12% precision and 85.04% recall are obtained, and F measure is improved by 5.68% compared with the head-driven parsing model introduced by Collins.

Simulation modeling and experimental analysis of thermodynamic charge performance in a variable-mass thermodynamic system2753-2762

摘要：The thermodynamic charge performance of a variable-mass thermodynamic system was investigated by the simulation modeling and experimental analysis. Three sets of experiments were conducted for various charge time and charge steam flow under three different control strategies of charge valve. Characteristic performance parameters from the average sub-cooled degree and the charging energy coefficient point of views were also defined to evaluate and predict the charge performance of system combined with the simulation model and experimental data. The results show that the average steam flow reflects the average sub-cooled degree qualitatively, while the charging energy coefficients of 74.6%, 69.9% and 100% relate to the end value of the average sub-cooled degree at 2.1, 2.9 and 0 respectively for the three sets of experiments. The mean and maximum deviations of the results predicted from those by experimental data are smaller than 6.8% and 10.8%, respectively. In conclusion, the decrease of average steam flow can effectively increase the charging energy coefficient in the same charge time condition and therefore improve the thermodynamic charge performance of system. While the increase of the charging energy coefficient by extending the charge time needs the consideration of the operating frequency for steam users.

An analytic electromagnetic calculation method for performance evolution of doubly fed induction generators for wind turbines2763-2774

摘要：An analytic electromagnetic calculation method for doubly fed induction generator(DFIG) in wind turbine system was presented. Based on the operation principles, steady state equivalent circuit and basic equations of DFIG, the modeling for electromagnetic calculation of DFIG was proposed. The electromagnetic calculation of DFIG was divided into three steps: the magnetic flux calculation, parameters derivation and performance checks. For each step, the detailed numeric calculation formulas were all derived. Combining the calculation formulas, the whole electromagnetic calculation procedure was established, which consisted of three iterative calculation loops, including magnetic saturation coefficient, electromotive force and total output power. All of the electromagnetic and performance data of DIFG can be calculated conveniently by the established calculation procedure, which can be used to evaluate the new designed machine. A 1.5 MW DFIG designed by the proposed procedure was built, for which the whole type tests including no-load test, load test and temperature rising test were carried out. The test results have shown that the DFIG satisfies technical requirements and the test data fit well with the calculation results which prove the correctness of the presented calculation method.